Base ES Hood

Surface mounted circular LED exterior bulkhead with opal cover and hood attachment

Overview

  • Die-cast aluminium hood attachment to reduce upward light
  • Significantly reduce energy consumption to standard fluorescent solution
  • Tough LED optimised opal polycarbonate diffuser sealed to IP65 (850°C tested)
  • Instant on to full brightness
  • Optional 3-hour emergency available
  • Also available with an open diffuser or with a grille attachment
  • Push terminal for fast installation
  • High impact IK10
  • Suitable for: education, healthcare, industrial, exterior, commercial

Materials

Body Die Cast Aluminium
Diffuser Polycarbonate
Fixings Stainless Steel

Technical

Mount Type Wall Mounted
Source Info Tridonic Tier 1 LED’s
Lumens 479lm
Efficacy up to 36lm/cW
Colour Temp 4000K, 6500K
Rendering Ra80+
MacAdam 3SDCM
Lifetime 50,000hr (L80/B10)
Temp Range (Ta) -10°C to 35°C
Voltage 230-240VV, 50/60Hz
Dimming Non-dimmable
Emergency 3 Hour, DALI, or non-emergency
Safety Class I
IK Rating IK10
IP Rating IP65
Safety Class I

Gallery

Dimensions

Diameter Depth Weight
362mm 118mm 5.00kg

Size

All dimensions are measured in millimetres (mm) and all weights are measured in kilograms (kg), unless states otherwise
  • 362mm (Ø)

Source

Lumens are delivered and based on 4000K. Changing some options may affect the lumen value - please contact sales if you are unsure.
  • 479Lm Delivered, 13.3cW, 350mA

CCT

  • 4000K, Ra80+
  • 6500K, Ra80+

Dimming

  • Non-dimmable

Emergency

  • Non-emergency
  • 3 Hour
  • DALI

Finish

  • Black (Matt) Powder Coated, RAL 9005

Sensor (Optional)

  • Microwave Sensor

Photocell (Optional)

  • Photocell

Please note: all images are used for illustrative purposes only. Individual features such as optics, materials, and colours may vary. The specification of the above product and accessories is correct at the date of publishing, but may be subject to change as necessary and without notice. Images are indicative of the quality and style of the specification and may not represent wholly the actual luminaire. Dimensional drawings are intended to give a general indication of the proposed size. The dimensions are accurate to within + or - 2mm. Specification, imagery and dimensional information are not intended to form part of any contract or warranty unless specifically incorporated in writing into the contract.