Discreet stand alone ceiling recessed emergency LED with halo effect Charge/Fault indication for escape route illumination


  • Two colour change (Red/Green) Halo effect
  • Ceiling Recessed Stand-alone emergency LED
  • Wide Beam angle 155° for Corridor Illumination
  • Bezel in White RAL9016 or Black RAL9005
  • Samsung Light Source
  • Key Switch / Self-Test / DALI feedback options
  • Minimum void depth 40mm
  • Constant Current
  • High Output - 266 Delivered Lumens
  • Supplied With Plugs and Leads
  • IP54 Ingress Protection as Standard (head only)
  • Suitable for: education, healthcare, office, retail


Bezel ABS Plastic
Heat Sink Aluminium


IP rating not including control gear
Mount Type Ceiling Mounted
Source Info Samsung
Lumens 266lm
Efficacy up to 89lm/cW
Colour Temp 6500K
Lifetime 50,000hr
Terminals N/Amm
IP Rating IP54


Diameter Depth Cutout Weight
50mm 45mm 43mm 0.06kg


All dimensions are measured in millimetres (mm) and all weights are measured in kilograms (kg), unless states otherwise
  • 50mm (Ø) min void 40mm from bezel


Lumens are delivered and based on 6500K. Changing some options may affect the lumen value - please contact sales if you are unsure.
  • DALI Delivered, Self Contained, 3cW
  • Self Test Delivered, Self Contained, 3cW
  • Maintained / Non-maintained Delivered, Self Contained, 3cW


  • 6500K


  • White (Matt) Powder Coated, RAL 9016
  • Black (Matt) Powder Coated, RAL 9005, IP20 Only

Gasket (Optional)

  • Gasket for Enhanced IP Seals the aperture to IP54

Please note: all images are used for illustrative purposes only. Individual features such as optics, materials, and colours may vary. The specification of the above product and accessories is correct at the date of publishing, but may be subject to change as necessary and without notice. Images are indicative of the quality and style of the specification and may not represent wholly the actual luminaire. Dimensional drawings are intended to give a general indication of the proposed size. The dimensions are accurate to within + or - 2mm. Specification, imagery and dimensional information are not intended to form part of any contract or warranty unless specifically incorporated in writing into the contract.