Effie AY

Round Asymmetric Darklight LED Downlight

Overview

  • Low glare architectural lit effect, ideal for wall wash applications
  • Discreet minimal bezel, from diecast aluminium
  • Matt black asymmetric darklight baffle, developed to minimise glare
  • Fitted with an integral IP44 protective lens as standard
  • Precision moulded polycarbonate reflector with medium beam distribution
  • Deep installed Tier 1 Chip-on-board LED module
  • Short circuit, overload and temperature protection
  • Symmetric, trimless and square versions also available
  • Suitable for: hospitality, living, office, retail, corridor, reception, commercial

Materials

Bezel Die Cast Aluminium
Baffle Die Cast Aluminium

Technical

Mount Type Ceiling Recessed
Source Info Tier 1 Chip-on-Board
Lumens 575lm, 725lm
Efficacy up to 73lm/cW
Colour Temp 2700K, 3000K, 4000K
Rendering Ra80+, Ra90+
MacAdam 3SDCM
Beam Angle(s) 32° / 35°
Lifetime 50,000hr (L70/B10)
Temp Range (Ta) -25°C to 25°C
Voltage 220-240V, 50/60Hz
Power Factor >0.9
Dimming DALI, Leading Edge, DSI, or non-dimmable
Emergency 3 Hour, DALI, Self-test, or non-emergency
Safety Class II
IP Rating IP44
Safety Class II 5 Year
Warranty

Gallery

Dimensions

Diameter Depth Cutout Weight
85mm 95mm 81mm 0.30kg

Size

All dimensions are measured in millimetres (mm) and all weights are measured in kilograms (kg), unless states otherwise
  • 85mm (Ø)

Source

Lumens are delivered and based on 4000K. Changing some options may affect the lumen value - please contact sales if you are unsure.
  • 575Lm Delivered, 8cW
  • 725Lm Delivered, 10cW

CCT

  • 2700K, Ra90+ Only available on Ra90+
  • 3000K, Ra80+
  • 4000K, Ra80+

Dimming

  • Non-dimmable
  • DALI
  • Leading Edge
  • DSI

Emergency

  • Non-emergency
  • 3 Hour
  • DALI
  • Self-test

Finish

  • Black (Matt) Powder Coated, RAL 9005
  • Signal White Powder Coated, RAL 9003

Baffle

  • Darklight Baffle
  • Softlight Baffle
  • Gold Reflector

Beam Angle

  • 32° Beam Angle
  • 35° Beam Angle

Please note: all images are used for illustrative purposes only. Individual features such as optics, materials, and colours may vary. The specification of the above product and accessories is correct at the date of publishing, but may be subject to change as necessary and without notice. Images are indicative of the quality and style of the specification and may not represent wholly the actual luminaire. Dimensional drawings are intended to give a general indication of the proposed size. The dimensions are accurate to within + or - 2mm. Specification, imagery and dimensional information are not intended to form part of any contract or warranty unless specifically incorporated in writing into the contract.