Effie TR-AY

Round Asymmetric Trimless Darklight LED Downlight


  • Trimless low glare architectural lit effect, ideal for wall wash applications
  • Plaster-in body for minimal visual impact
  • Matt black asymmetric darklight baffle, developed to minimise glare
  • Fitted with an integral IP44 protective lens as standard
  • Precision moulded polycarbonate reflector with medium beam distribution
  • Deep installed Tier 1 Chip-on-board LED module
  • Short circuit, overload and temperature protection
  • Symmetric, square and trimmed versions also available
  • Suitable for: hospitality, living, office, retail, corridor, reception, commercial


Bracketry Sheet Steel
Baffle Die Cast Aluminium


Mount Type Ceiling Trimless
Source Info Tier 1 LED components (Tridonic, Philips, Osram)
Lumens 537lm, 695lm
Efficacy up to 85lm/cW
Colour Temp 2700K, 3000K, 4000K
Rendering Ra80+, Ra90+
MacAdam 3SDCM
Beam Angle(s) 20° / 40°
Lifetime 50,000hr (L70/B10)
Temp Range (Ta) -25°C to 25°C
Voltage 220-240V, 50/60Hz
Power Factor >0.9
Dimming DALI, Leading Edge, DSI, or non-dimmable
Emergency 3 Hour, DALI, Self-test, or non-emergency
Safety Class II
IP Rating IP44
Safety Class II 5 Year



Diameter Depth Cutout Weight
85mm 95mm 81mm 0.30kg


All dimensions are measured in millimetres (mm) and all weights are measured in kilograms (kg), unless states otherwise
  • 85mm (Ø)


Lumens are delivered and based on 4000K. Changing some options may affect the lumen value - please contact sales if you are unsure.
  • 537Lm Delivered, 6.7cW
  • 695Lm Delivered, 8.2cW


  • 2700K, Ra90+ Only available as Ra90+
  • 3000K, Ra80+
  • 4000K, Ra80+


  • Non-dimmable
  • DALI
  • Leading Edge
  • DSI


  • Non-emergency
  • 3 Hour
  • DALI
  • Self-test


  • Darklight Baffle
  • Softlight Baffle
  • Gold Reflector

Beam Angle

  • 20° Beam Angle
  • 40° Beam Angle

Please note: all images are used for illustrative purposes only. Individual features such as optics, materials, and colours may vary. The specification of the above product and accessories is correct at the date of publishing, but may be subject to change as necessary and without notice. Images are indicative of the quality and style of the specification and may not represent wholly the actual luminaire. Dimensional drawings are intended to give a general indication of the proposed size. The dimensions are accurate to within + or - 2mm. Specification, imagery and dimensional information are not intended to form part of any contract or warranty unless specifically incorporated in writing into the contract.