Dark Adjustable

Ceiling recessed adjustable LED downlight with darklight collar

Overview

  • LED Downlighter with die-cast aluminium adjustable bezel finished matt white
  • Architectural darklight snoot for low glare
  • Building Regs Part L1A and L2A compliant
  • Dimmable and emergency versions available
  • Also available as a fire rated version
  • 40º beam angle
  • Suitable for: hospitality, living, corridor, reception

Materials

Bezel Die Cast Aluminium
Heat Sink Die Cast Aluminium

Technical

Mount Type Ceiling Recessed
Source Info Tier 1 LED
Colour Temp 2700K, 3000K, 4000K
Rendering Ra80+
MacAdam 4SDCM
Lifetime 40,000hr (L70)
Voltage 230V, 50/60Hz
Power Factor >0.8
Dimming 1-10V Analogue, DALI, Trailing Edge, or non-dimmable
Emergency 3 Hour, DALI, Self-test, or non-emergency
IP Rating IP20

Dimensions

Diameter Depth Cutout Other
80mm 84mm 70mm 110mm

Size

All dimensions are measured in millimetres (mm) and all weights are measured in kilograms (kg), unless states otherwise
  • 80mm (Ø) Standard Adjustable Version - void required 110mm

Source

Lumens are delivered and based on 4000K. Changing some options may affect the lumen value - please contact sales if you are unsure.
  • 750Lm 750Lm Source, 9W, 200mA
  • 975Lm 975Lm Source, 11W

CCT

  • 2700K, Ra80+
  • 3000K, Ra80+
  • 4000K, Ra80+

Dimming

  • Non-dimmable
  • 1-10V Analogue
  • DALI
  • Trailing Edge

Emergency

  • Non-emergency
  • 3 Hour
  • DALI
  • Self-test

Finish

  • Signal White Powder Coated, RAL 9003

Enhanced IP Rating (Optional)

  • IP54

Attachments (Optional)

  • Honeycomb Louvre
  • Etched Glass Disk

Related Products

    Please note: all images are used for illustrative purposes only. Individual features such as optics, materials, and colours may vary. The specification of the above product and accessories is correct at the date of publishing, but may be subject to change as necessary and without notice. Images are indicative of the quality and style of the specification and may not represent wholly the actual luminaire. Dimensional drawings are intended to give a general indication of the proposed size. The dimensions are accurate to within + or - 2mm. Specification, imagery and dimensional information are not intended to form part of any contract or warranty unless specifically incorporated in writing into the contract.