Phoebe Under Canopy

Ultra efficient exterior LED downlight

Overview

  • Bezel to allow fixing from underside
  • Diffused non-LED appearance
  • IP65 for use in wet areas
  • 58mm ultra low void depth
  • Loop-in Loop-out plug connector included as standard
  • Suitable for: education, exterior, facades, commercial

Materials

Bezel Aluminium Holes to facilitate fixing from underside
Heat Sink Die Cast Aluminium

Technical

Mount Type Ceiling Recessed
Source Info Tier one LEDs
Lumens 635lm, 894lm
Efficacy up to 112lm/cW
Colour Temp 2700K, 3000K, 4000K
Rendering Ra80+
MacAdam 3SDCM
Lifetime 40,000hr (L70)
Power Factor >0.9
Dimming 1-10V Analogue, DALI, Phase-cut, or non-dimmable
Emergency 3 Hour, DALI, or non-emergency
Safety Class II
IP Rating IP65
Safety Class II 5 Year
Warranty

Gallery

Dimensions

Diameter Depth Cutout Weight
110mm 68mm 75mm 0.34kg

Size

All dimensions are measured in millimetres (mm) and all weights are measured in kilograms (kg), unless states otherwise
  • 110mm (Ø)

Source

Lumens are delivered and based on 4000K. Changing some options may affect the lumen value - please contact sales if you are unsure.
  • 635Lm Delivered, 6cW
  • 894Lm Delivered, 8cW

CCT

  • 2700K, Ra80+
  • 3000K, Ra80+
  • 4000K, Ra80+

Dimming

  • Non-dimmable
  • 1-10V Analogue
  • DALI
  • Phase-cut

Emergency

  • Non-emergency
  • 3 Hour
  • DALI

Finish

Unless otherwise specified matt cream white will be used as a default white finish
  • Anthracite Grey Powder Coated, RAL 7016
  • Black (Matt) Powder Coated, RAL 9005
  • Cream White Powder Coated, RAL 9010
  • Graphite Grey Powder Coated, RAL 7024
  • Signal White Powder Coated, RAL 9003
  • Silver (White Aluminium) Powder Coated, RAL 9006
  • White (Matt) Powder Coated, RAL 9016

Please note: all images are used for illustrative purposes only. Individual features such as optics, materials, and colours may vary. The specification of the above product and accessories is correct at the date of publishing, but may be subject to change as necessary and without notice. Images are indicative of the quality and style of the specification and may not represent wholly the actual luminaire. Dimensional drawings are intended to give a general indication of the proposed size. The dimensions are accurate to within + or - 2mm. Specification, imagery and dimensional information are not intended to form part of any contract or warranty unless specifically incorporated in writing into the contract.