Dark Mini
Miniature LED Darklight Downlight
Overview
- Miniature LED downlight for discrete accent lighting
- Darklight Baffle for low glare
- Choice of beam angle
- Optional linking leads available
- Suitable for: hospitality, living, reception, wall wash
Materials
Bezel | Die Cast Aluminium |
---|---|
Heat Sink | Die Cast Aluminium |
Technical
Mount Type | Ceiling Recessed |
---|---|
Source Info | Tier 1 LED |
Lumens | 120lm, 290lm |
Efficacy | up to 73lm/cW |
Colour Temp | 2700K, 3000K, 4000K |
Rendering | Ra80+ |
MacAdam | 4SDCM |
Beam Angle(s) | 14° / 40° |
Lifetime | 40,000hr (L70) |
Power Factor | >0.8 |
Dimming | 1-10V Analogue, Leading Edge, or non-dimmable |
Emergency | Non-emergency |
Safety Class | I |
IP Rating | IP20 |
Dimensions
Diameter | Height | Cutout |
---|---|---|
49mm | 45mm | 44mm |
Size
All dimensions are measured in millimetres (mm) and all weights are measured in kilograms (kg), unless states otherwise-
49mm (Ø)
Source
Lumens are delivered and based on 2700K. Changing some options may affect the lumen value - please contact sales if you are unsure.-
120Lm Delivered, 2cW
-
290Lm Delivered, 4cW, 2700K 14º Only
CCT
4W version only available in 2700K-
2700K, Ra80+
-
3000K, Ra80+
-
4000K, Ra80+
Dimming
Drivers do not fit through the cut out of the light fitting and must be sited remotely,-
Non-dimmable
-
1-10V Analogue
-
Leading Edge
Emergency
-
Non-emergency
Finish
-
Cream White Powder Coated, RAL 9010
Beam Angle
-
14° Beam Angle
-
40° Beam Angle
Accessories
Please order accessories separately- DAR-XS-ACC-PCA-XXXX Additional Power Cable Length 1m Extension lead - must be ordered to link fittings in series
Please note: all images are used for illustrative purposes only. Individual features such as optics, materials, and colours may vary. The specification of the above product and accessories is correct at the date of publishing, but may be subject to change as necessary and without notice. Images are indicative of the quality and style of the specification and may not represent wholly the actual luminaire. Dimensional drawings are intended to give a general indication of the proposed size. The dimensions are accurate to within + or - 2mm. Specification, imagery and dimensional information are not intended to form part of any contract or warranty unless specifically incorporated in writing into the contract.